CAP-01
Heavy & light machining
Turning, milling, boring, drilling and slotting of components from a few kilograms to multi-tonne weldments, produced to client drawings.
Est. 2022 · Palsai, Wada
Industrial fabrication · Precision machining
We build steel
solutions that have to work.
H.D. Machino Fab Pvt. Ltd. is a custom mechanical engineering and industrial manufacturing works — machining, fabrication, welding, assemblies, structural work, components and process machinery, produced to customer requirement inside one 18,500 sq ft covered bay.
0
Sq ft covered bay
0+
Years in production
0+
Machining processes
0+
Industrial clients
02About the works
One roof,
whole process
H.D. Machino Fab Pvt. Ltd. is a custom mechanical engineering and industrial manufacturing works at Palsai, Wada, in Palghar district. Machining, fabrication, welding, assemblies, structural work, components and process machinery are produced under one 18,500 sq ft covered roof, to the standard, detail design or drawing supplied by the customer.
The floor runs well-maintained machines from some of the best manufacturers in the world, operated by machinists and fitters who have worked the same steel, the same drawings and the same tolerances for over a decade.
Vision
To be the works that heavy and precision industry turns to when a component simply has to be right the first time.
Mission
Engineer, manufacture and deliver every component to the customer's drawing — on tolerance, on time, and with the whole process kept in-house and accountable.
Process spine
- 01 Requirement
- 02 Engineering
- 03 Raw material
- 04 Cutting
- 05 Machining
- 06 Fabrication
- 07 Welding
- 08 Finishing
- 09 Inspection
- 10 Assembly
- 11 Dispatch
03Cutting & preparation
What comes off
our floor
Four core capabilities, run in sequence inside one workshop so a job never leaves the building between operations.
CAP-02
Structural fabrication
Base frames, beams, brackets, taper plates and pre-engineered fabrication buildings — fabricated, stress-relieved and machined in-house under one roof.
CAP-03
Assemblies
Built-up mechanical assemblies — hydraulic power pack units, process machinery and precision hydraulic items for offshore and heavy engineering.
CAP-04
Tooling & fixtures
Purpose-built tools, jigs and fixtures engineered for repeatability on the customer's own production line.
04Structural fabrication
Frames, beams,
brackets, plates
Base frames, side and top frames, motor mounting brackets and taper plates — fabricated, then machined on the same shop floor so the mounting faces are true to the weldment.
- Fabricated and machined under one roof
- Overhead crane handling across the full bay
- Built to the client's standard, detail design or drawing
05Welding
Joined, not just bolted
Structural and pressure-critical joints are welded by fitters who have worked the same drawings, the same steel and the same tolerances for over a decade. The weld is where a fabricated assembly either holds or fails — we treat it that way.
Structural weldments
Tanks & vessel parts
Offshore & heavy engineering
06Machining & finishing
The machines
on the floor
Well-maintained, precise machines selected from some of the best manufacturers in the world, operated by skilled machinists trained in current CNC and CAM programming.
07Assembly
Every part
accounted for
A flanged shaft assembly, taken apart along its own axes. Shaft turned, housing line-bored after welding, flanges faced and drilled — then put back together on the same floor that made them.
- P-01 · Hex bolt set
M16 fasteners, torqued to the assembly spec.
- P-02 · Front flange
Vertically bored, faced true to the shaft axis.
- P-03 · Bearing housing
Line-bored after welding so the bore follows the weldment.
- P-04 · Drive shaft
CNC-turned, ground journals, keyway slotted.
- P-05 · Rear flange
Drilled and tapped on the VMC in one setting.
Loading assembly · flanged shaft · 5 parts
Separation
0%
Engineering / Assembly
Engineered in detail.
Every component has a purpose. Every interface is engineered with intent.
One example from the floor — a machined shaft assembly, shown coming together.
Drag to inspectSwipe to inspect
0%
08Finishing & products
What we manufacture
Components produced in accordance with the standard and detail design or drawing provided by the client.
01
Parts of hydraulic power packs
02
Hydraulic items, fittings & flanges
03
Piling machine components
04
Continuous casting machinery parts
05
Process machinery for the oil industry
06
Tank and vessel parts
07
Tools & fixtures
08
Offshore & heavy engineering components
09
Structural fabrication — base frames, beams, brackets, taper plates, PEB
10
Printing & lamination machine frames and mountings
09Inspection
Checked before it leaves
The goal is components that live up to today's high standards — verified through the process, not hoped for at the end of it.
Build to drawing
Every component is produced to the standard, detail design or drawing supplied by the client — no interpretation, no deviation.
CNC & CAM programming
Engineers trained in current CAM programming translate geometry into verified toolpaths before a single cut is taken.
Trained inspection
The team is trained in current quality-control technique; dimensions are verified through the process, not only at the end.
10Gallery
On the floor
Photographs from the works — the team, the machines and the components that leave the bay.
01 — Team
Photograph pendingMachining crew
Photograph pendingFabrication & welding
Photograph pendingEngineering & inspection
02 — Products & machinery
11Supply
Who we supply
Long-running supply relationships across construction, hydraulics, offshore and printing machinery.
Larsen & Toubro Ltd.
Construction Division — MTHL-01 Project
Parker Hannifin India Pvt. Ltd.
Parts of hydraulic power packs
HYDAC India Pvt. Ltd.
Hydraulic items & machined components
Concast (India) Private Limited
Continuous casting machinery parts
Kumar Metal Industries Pvt. Ltd.
Process machinery components
Ashok Industries
Piling machine components
Kohli Industries
Printing machine components
Advance Bolting Solutions Pvt. Ltd.
Tools & fixtures
Hy Precision Hydraulic
Offshore & heavy engineering components
H & H Precision Pvt. Ltd.
Offshore & heavy engineering components
12Work with us
Machinists,
fitters, engineers
The works takes on skilled machinists, welders, fitters and mechanical engineers. Send your details and the trade you work in; we hold them against openings as they come up on the floor.
13Dispatch
Send us the
drawing
Call the shop to arrange a job, request a quotation or receive additional information.
Works & registered addressPlot No. 115/2, Village Palsai, Tal. Wada, Dist. Palghar — 421312, Maharashtra, India
Capability summary
- Covered machining area
- 18,500 sq ft
- Operating since
- 2022
- Experience
- 10+ years
- Handling
- Overhead crane, full bay
- Work basis
- To client drawing / detail design